High Pressure Hydraulic Butt Fusion Machine V630SHP 315MM-630MM (12" IPS -24'' IPS) | HDPE fusion machine manufacturer
- modelo
- V630SHP
propriedade
- Certificate
- CE, ISO9001
- Packing Material
- Plywood Box
- MOQ
- 1set
- Working Range in MM
- 315mm - 630mm
- Working Range in Inch
- 12 - 24Inch
- Working Pressure Range
- 0 - 180Bar
Avaliação
Descrição
High Pressure Hydraulic Butt Fusion Machine V630SHP 315MM-630MM (12" IPS -24'' IPS)
The V630SHP is a high-pressure hydraulic butt fusion welding machine, also referred to as the Poly Welder or HDPE Butt Welder. Specifically designed for joining high-density polyethylene (HDPE) pipes and fittings, this machine offers a reliable and efficient solution for creating strong and durable connections in HDPE pipelines. Its robust construction and hydraulic control system enables precise pressure application and temperature control, ensuring consistent and leak-free welds.
Equipped with a heating plate, pressure control mechanisms, and a clamping mechanism, the V630SHP provides operators with the tools necessary for a successful fusion process. The machine's control panel offers an intuitive interface for adjusting parameters such as temperature and pressure, while safety features like temperature sensors and emergency stop buttons prioritize operator safety. Overall, the V630SHP Poly Welder or HDPE Butt Welder is a dependable piece of equipment that plays a vital role in the field of plastic welding, facilitating the creation of secure and long-lasting connections in HDPE pipelines.
|
Product Details
|
|||
|
WELDING RANGE O.D.
|
315MM - 630MM
|
PISTON AREA
|
44.00 CM²
|
POWER SUPPLY | 380V±10%, 50/60HZ | TEMPERATURE RANGE | MAX. 320ºC |
HEATER POWER | 9.3KW | PACKING DIMENSION | 1600*1130*1100 MM |
|
TRIMMER POWER
|
1.5KW
|
1030*720*1350 MM
|
|
|
PUMP POWER
|
1.5KW
|
800*350*400 MM
|
|
WORKING PRESSURE RANGE | 0 - 120 BAR | GROSS WEIGHT | 739KGS |
Basic Frame
Featured by
- Oil seal kit, origins from Germany, make sure that the pressure performance stays in more stable way.
- 4sets quick coupling helps the operator to prepare the Poly Pipe Welder better before and after welding, and we use STUCCHI which from Italy ensures no hydraulic oil leakages when unplugging or plugin.
- Using an integral shaft (top chromate treatment) instead of the assembled shaft, ensure the chassis strength to avoid possible frame twists or deform when dragging the pipe with extreme parameters.
Heating Plate
Featured by
- We use Dupont from the USA for coating the heating plate, which is the best in the industry. It's many stickers on an aluminum plate, more non-sticky to plastic pipes surface. The temperature deviation of different points on the heating plate is 2-3 degrees (small-size HDPE Welding Machine) and 5-6 degrees (big-size Poly Pipe Welder).
Trimmer
Featured by
- High-quality drill, which can do 220V, 3phase as an option.
Electrical box Assy.
Featured by
- Temperature-controlled switch when the temperature-controlled switch is off, all the aviation plugs are not live, even the power cable connected with the power source. It is quote safe to connect or disconnect the plugs before or after welding.
- Very well-connected wires and a more reasonable layout. Each wire is marked with the corresponding numbers, thus giving more convenience to do the troubleshooting when a failure happens.
Support
Featured by
- Ergonomic design
Hydraulic Power Station
- Solid relays have a bigger load capacity and work in a more stable situation, which has a much longer life.
- The circuit breaker works with an electricity leakage protection switch. Including the earth wires, there're 2 elements to activate the protection when electricity is leaking.
- Non-fan motor (small size machines), waterproof, sand-proof, and dust-proof at a higher level. The motor provides sufficient/full power to provide support for hydraulic power.
Data Logger
Aluminum Stub End Holder
Roller Support
Crane
