Hydraulic Butt Fusion Machine V500 200MM-500MM (8" IPS -20'' IPS) | Plastic fusion machine manufacturer
- modelo
- V500
propriedade
- Certificate
- CE, ISO9001
- Packing Material
- Plywood Box
- MOQ
- 1set
- Working Range in MM
- 200mm - 500mm
- Working Range in Inch
- 8 - 20Inch
- Working Pressure Range
- 0 - 120Bar
Avaliação
Descrição
Hydraulic Butt Fusion Machine V500 200MM-500MM (8" IPS -20'' IPS)
V500 is an on-site hdpe plastic welding machine suitable for welding plastic pipe and fittings made of HDPE, PP, PVDF, and other thermoplastics material.
The machine is used to butt weld pipe and fittings such as elbow, tees, wye, and flange necks without any additional equipment by simply adjusting the clamps and drag bar.
|
Product Details
|
|||
|
WELDING RANGE O.D.
|
200MM - 500MM
|
PISTON AREA
|
23.06 CM²
|
POWER SUPPLY | 380V±10%, 50/60HZ | TEMPERATURE RANGE | MAX. 320ºC |
HEATER POWER | 7.3KW | PACKING DIMENSION | 1580*1000*960 MM |
|
TRIMMER POWER
|
1.5KW
|
1030*680*1200 MM
|
|
|
PUMP POWER
|
1.5KW
|
800*350*400 MM
|
|
WORKING PRESSURE RANGE | 0 - 120 BAR | GROSS WEIGHT | 611KGS |
Basic Frame
Featured by
- Oil seal kit, origins from Germany, make sure that the pressure performance stays in a more stable way.
- 4sets quick coupling helps the operator to prepare the machine better before and after welding, and we use STUCCHI which from Italy ensures no hydraulic oil leakages when unplugging or plugin.
- Using an integral shaft (top chromate treatment) instead of the assembled shaft, ensure the chassis strength to avoid possible frame twist or deform when dragging the pipe with extreme parameters.
Heating Plate
Featured by
- We use Dupont from the USA for coating the heating plate, which is the best in the industry. It's many stickers on an aluminum plate, more non-sticky to plastic pipes surface. The temperature deviation of different points on the heating plate is 2-3 degrees (small size machine) and 5-6 degrees (big size machine).
Trimmer
Featured by
- High-quality drill, which can do 220V, 3phase as an option.
Electrical box Assy.
Featured by
- Temperature-controlled switch when the temperature-controlled switch is off, all the aviation plugs are not live, even the power cable connected with the power source. It is quote safe to connect or disconnect the plugs before or after welding.
- Very well-connected wires and a more reasonable layout. Each wire is marked with the corresponding numbers, thus giving more convenience to do the troubleshooting when a failure happens.
Support
Featured by
- Ergonomic design
Hydraulic Power Station
- Solid relays have a bigger load capacity and working in a more stable situation, which has a much longer life.
- The circuit breaker works with an electricity leakage protection switch. Including the earth wires, there're 2 elements to activate the protection when electricity is leaking.
- Non-fan motor (small size machines), waterproof, sand-proof, and dust-proof at a higher level. The motor provides sufficient/full power to provide support for hydraulic power.
Data Logger
Aluminum Stub End Holder
Roller Support
Crane
